Advertise in Print | Subscriptions
Auction Info
Auctioneer: Main Resource Equipment Auctions, Dennis Biliske
Address: 1200 42nd St S, Grand Forks, ND 58201
GRAND FORKS AREA

EQUIPMENT & TRUCK AUCTION

LOCATION: Indoors at the Alerus Center,

1200 S. 42nd St, Grand Forks, ND (Just off I-29)

TUESDAY, NOVEMBER 26, 9:00 AM

AUCTIONEER’S NOTE: The auction will take place in the Alerus Center ballroom by huge video screen & photographs. All units will be on hand for inspection on the Alerus Center Lot- go outside to “look & touch” come inside to “bid & buy”. Running inspection from noon to 5pm November 25th and 8am to 10am auction day. Please be prepared as there will be two auction rings.

SPECIAL NOTES: All items must be removed by December 4, 2013 at 1pm- loading dock on site. Alerus Center is equipped with hotel & restaurant facilities. We will accept absentee bids until 6pm November 25th!

& ONLINE BIDDING &

Please register in advance to bid live online by visiting

www.resourceauction.com

IMPORTANT NOTICE: THIS IS A VERY PRELIMINARY LISTING! AS THIS AD WENT TO PRESS WE WERE ADDING MANY UNITS & GATHERING NUMEROUS SPECS. PLEASE SEE www.resourceauction.com FOR ADDITIONS OR DELETIONS & CHANGES TO DESCRIPTIONS!

FOR MORE PHOTOS, INFORMATION & UPDATES- VISIT OUR WEBSITE WHICH WILL BE UPDATED OFTEN UNTIL AUCTION DAY!!!

FINANCING AVAILABLE: Nearly ALL of our late model combines, tractors and heads are eligible for conventional, low or no interest financing to qualified U.S. buyers. Please call in advance for details on specific program units or visit our website for breakdown.

NOTE: There are 6 units listed below as (*NFC*) that were “not fully committed” at the press time for this publication of Farmer’s Forum. We expect these units to be on the auction, but please call or visit our website for final availability.

FOUR WHEEL DRIVE & LARGE BELTED TRACTORS

2012 JD 9560RT belted ag tractor, 560hp, 18/6 power shift trans, premium radio, 5 hyd, 30” Durabilt tracks-95% rubber, 7” touch screen display, Auto Trac ready, deluxe light pkg, 2600lb front weight pkg, only 237 hrs, remaining warranty, SN#901592; 2012 Case IH ST500Q, Quad Trac, luxury cab, 3pt, 4 hyd w/power beyond, NAV II, WAAS, 262 receiver, hi cap pump, hi cap drawbar, 30” belts, 740 hrs, remaining warranty, SN#ZBF128508- (*NFC*); 2010 JD 9430T belted ag tractor, 425hp, 18/6 power shift trans, radar, 4 hyd, 36” Durabilt tracks- excellent rubber, Auto Trac ready, HD drawbar, Xenon light pkg, front weight pkg, only 1013 hrs, SN#912302; 2011 JD 9430 4WD, 18/6 power shift trans, deluxe leather interior, active seat, buddy seat, elec mirrors, 5 hyd, 1000 PTO, radar, Auto Trac ready, HID light pkg, HD drawbar, 710/70-42 duals- 90% rubber, only 620 hrs, SN#025248; 2011 JD 9330 4WD, 18/6 power shift trans, active seat, buddy seat, 1000 PTO, 4 hyd, diff locks, Auto Trac ready, HID lights, rear weight pkg, 710/70-42 duals- 90% rubber, only 742 hrs, SN#023827; 2009 JD 9530 4WD, 18/6 power shift trans, active cloth seat, buddy seat, elec mirrors, 5 hyd, radar, Auto Trac ready, HID lights pkg,800/70-38 duals- 80% rubber, rear weight pkg, only 1306 hrs, SN#13676; 1997 JD 9400 4WD, 24 spd trans, 4 hyd, diff lock, radar, Auto Trac ready, 710/70-38 duals -75% rubber, weight pkg, 5908 hrs, clean, SN#001966; 2000 JD 9200 4WD, 24 spd trans, 4 hyd, diff lock, radar, 20.8-42 duals- 90% rubber, rear weight pkg, recent eng OH & rubber, only 3998 hrs, clean, SN#030523; 2002 New Holland TJ325 4WD, power shift, 3pt w/ quick hitch, 1000 PTO, 4 hyd, Auto Steer, 20.8-42 duals, 3890 hrs, SN#RVS001545; 1998 JD 9200 4WD, 24 spd trans, 3pt w/ quick hitch, 3 hyd, diff lock, 20.8-42 duals, front & rear weight pkg, 2720 hrs, SN#010623; 1994 Cat 65C belted ag tractor, power shift, 4 hyd, 36” tracks, JD ATU- no globe, ISO, GPS navigation ready, local tractor, always shedded, 6612 hrs, SN#2ZJ00622; 1991 Case IH 9280, power shift, 4 hyd, 20.8-42 triples- excellent matched rubber all around, EZ Steer auto guidance, 8205 hrs, SN#JCB0028444; IHC 4386 4WD, CAH, 4 hyd, 18.4-38 duals, clean older tractor; IHC 4366 4WD, CAH, 4 hyd, 18.4-38 duals, clean older tractor

ROW CROP TRACTORS

2013 Case IH MG290 MFWD, power shift, cab susp, luxury cab, trans heater, 3pt w/ quick hitch, 3 PTOs, 4 hyd w/ power beyond, hi cap hyd pump, HP/XP w/ Pro 700 screen, front fenders, front weights, 380/90R50 duals, 380/85R34 fronts, 737 hrs, remaining warranty, SN#ZCRD08134 (*NFC*); 2013 Case IH MG290 MFWD, power shift, cab susp, luxury cab, trans heater, 3pt w/ quick hitch, 3 PTOs, 4 hyd w/ power beyond, hi cap hyd pump, HP/XP w/ Pro 700 screen, front fenders, front weights, 380/90R50 duals, 380/85R34 fronts, 725 hrs, remaining warranty, SN#ZCRD08311(*NFC*); 2010 Case IH MG335 MFWD, power shift, creeper, 3pt w/ quick hitch, 540/1000 PTO, 4 hyd w/ power beyond, AFS auto depth control, Auto Guide ready, radar, hi cap hyd pump, 480/80R46 duals, 380/85R34 front duals, 1595 hrs, SN#Z9RZ06829 (*NFC*); 2006 JD 8530 MFWD, IVT trans, 3pt w/ quick hitch, 1000 PTO, 4 hyd, Greenstar ready, 320/80R54 duals, 4321 hrs, SN#D005959 (*NFC*); 2010 JD 8245R MFWD tractor, IVT trans, instruction seat, active seat, 3pt w/ quick hitch, PTO, 4 hyd w/ power beyond, Auto Trac ready, front weights, 380/90R50 duals, 380/85R34 fronts, second owner local tractor, 2451 hrs, SN#2790; 2003 JD 8230 MFWD, deluxe cab, active seat, power shift, 3pt w/ quick hitch, 1000 PTO, 4 hyd w/ power beyond, front weights, HID lights, 320/90R54 duals 70% rubber, 320/85R34 fronts, 4351 hrs, SN#12915; 2009 Case IH MG245 MFWD, deluxe cab, power shift, instruct seat, 3pt w/ quick hitch, 540/1000 PTO, 4 hyd w/ power beyond, creeper, radar, auto guidance ready, 380/80-38 fronts, 380/90-54 duals, weights, 3255hrs, SN#Z7RZ05097; 2004 Case IH MX210 MFWD, deluxe cab, power shift, 3pt w/ quick hitch. 540/1000 PTO, 5 hyd, HID lights, front weights, 380/90R50 rear duals, 380/85R34 front duals, 4996 hrs, SN#JAZ131639; 2002 JD 7810 MFWD, CAH, power shift, 3pt w/ quick hitch, 540/1000 PTO, 3 hyd w/ power beyond, 740 self leveling loader w/ bkt, field office, like new 18.4-42 rear duals, new 14.9-30 fronts, 6470 hrs, SN#P073028; 2001 JD 8410T belted ag tractor, narrow gauge, 3pt w/ quick hitch, PTO, 4 hyd w/ power beyond, 16” belts- 40%, Auto Trac ready, front weights, second owner local tractor, 5602 hrs, SN#902344; 1998 JD 8400T belted ag tractor, narrow gauge, 3pt w/ quick hitch, PTO, 4 hyd w/ power beyond, 16” belts- 60%, Auto Trac ready, front weight bracket, 6553 hrs, SN#902196; 1979 JD 4440 tractor, CAH, quad range, 3pt w/ quick hitch, 540/1000 PTO, 3 hyd, front tank & weights, 18.4-38 tires, 12157 hrs, SN#16066; 1978 JD 4440 tractor, CAH, quad range, 3pt w/ quick hitch, 540/1000 PTO, 2 hyd, front tank, 18.4-38 tires, 13248 hrs, SN#10424; 1975 JD 8630 4WD, CAH, quad range, 1000 PTO, 3 hyd, JD factory front hyd dozer, 23.1-34 tires & duals, 10318 hrs showing, SN#2105

CASE IH & NEW HOLLAND COMBINES

2010 Case IH 9120T track combine, corn/grain/bean, RWD, 36” rubber tracks, rock trap, lateral tilt feeder, AccuGuide w/ Nav II controller, AFS antenna, 24’ unloading auger, HID lighting, 890 sep hrs, 973 eng hrs, SN#YAG209769; 2010 Case IH 8120, lateral tilt, AccuGuide w/ Nav II controller, AFS antenna, 24’ unloading auger, axle ext, 620/70R42 duals, 890 sep hrs, 921 eng hrs, SN#Y9G208165; 2011 Case IH 8120 RWD, corn/ grain/ bean, full auto steer, lateral tilt feeder, long auger, color touch screen, chopper, 670/70R42 duals, large rear rubber, 1102 sep hrs, 1353 eng hrs, loaded, SN#YAG210713; 2010 Case IH 8120 RWD, corn/ grain/ bean, full auto steer, lateral tilt feeder, long auger, color touch screen, chopper, 670/70R42 duals, large rear rubber, 1763 sep hrs, 2216 eng hrs, loaded, SN#Y9G207968; 2009 Case IH 8120 RWD, corn/ grain/ bean, full auto steer, lateral tilt feeder, long auger, color touch screen, chopper, 670/70R42 duals, large rear rubber, 1160 sep hrs, 1545 eng hrs, loaded, SN#Y9G205733; 2009 Case IH 7120, corn/grain/bean, Y/M monitor, color screen, rock trap, lateral tilt feeder, long auger, chopper, 650/42 duals, 650 sep hrs, 850 eng hrs, loaded, SN#Y9G207148; 2008 Case IH 8010, lateral tilt feeder, rock trap, full auto steer, Y/M, PRO 600 screen, 650/42 duals, long auger, chopper, 1220 sep hrs, 1685 eng hrs, loaded, SN#HAJ202327; 2007 Case IH 7010, lateral tilt, rock trap, Y/M monitor w/ mapping, chopper, self leveling sieves, well equipped, 520/85R42 duals, 600/65R28 rears, 1265 sep hrs, 1651 eng hrs, SN# HAJ203812 (*NFC*); 2009 Case IH 7088, field tracker, rock trap, Y/M monitor, AFS ant w/ Pro 600 color screen, ext wear rotor, chopper, 520/85R42 duals, axle ext, 24’ unload auger, only 750 sep hrs, 997 eng hrs, SN#Y9G001456; 2009 Case IH 7088, CAH, standard chopper, Pro 600, Y/M monitor, auto crop setting, HID stadium lights, 800/65R32 drive tires, 18.4-24 rears, 860 sep hrs, 1124 eng hrs, SN#Y8G000514; 2005 Case IH 2388, rock trap, AFX rotor, chopper, bin ext, long auger, 30.5L-32 drive tires, 14.9-24 rears, 2321 sep hrs, 2773 eng hrs, SN#JJC0276509- extensive repairs before 2012 crop year, SN#276509; 2004 Case IH 2388, rock trap, AFX rotor, chopper, Big Top, long auger, 30.5L-32 drive tires, 14.9-24 rears, 1762 sep hrs, 2154 eng hrs, SN#JJC0276213- extensive repairs before 2012 crop year, SN#276213; 2004 Case IH 2388, spec rotor, field tracker, chopper, rock trap, hyd feeder reverser, grain bin ext, Universal Display Plus Yield monitor, Trimble auto steer ready, 30.5-32 drive tires, 14.9-24 steering tires, 1727 sep hrs, 2266 eng hrs, SN#JJC0274856; 2003 Case IH 2388, AFX rotor, chopper, rock trap, auto reel spd, AHHC, chaff spreader, F/A, Y/M monitor, grain bin ext, 30.5-32 drive tires, 1865 sep hrs, 2652 eng hrs, SN#JJC0273986; 1998 Case IH 2388, spec rotor, fine cut chopper, razor rock beater, auger ext, 30.5x32, hopper topper w/ roll tarp, speed up kit for auger, upgrade kit for fan, new poly feeder chain, total rebuild on feeder house, 2 sets of grates- wide & narrow, 2500 sep hrs, 3300 eng hrs, SN#JJC0199102; 1995 Case IH 2188, RWD, spec rotor, chopper, rock trap, 30.5-32 singles, 5500 sep hrs, 6900 eng hrs, $24000 work order on thresher components, SN#JJC0189997; 1996 Case IH 2188, spec rotor, chopper, rock trap, 3 strand feeder chain, HD feeder drum, keystock & slotted grates, large & small wire concaves, hopper topper, F/A, corn/grain/bean combine, 3478 sep hrs, 4500 eng hrs, SN#JJC0192145; 1996 Case IH 2188 RWD, specialty rotor, rock trap, chopper, bin ext, duals, 3397 sep hrs, 5055 eng hrs, SN#JJC0191580; 1994 Case IH 1688, rock trap, fdr rev, chopper, spec rotor, SN#JJC0121045; 1994 Case IH 1688, rock trap, fdr rev, chopper, spec rotor, 4590 eng hrs, SN#JJC0120913; 2001 New Holland TR99, twin rotor, elec rock trap, lateral tilt fdr, chopper, hyd fdr rev, SN#565908

JOHN DEERE & LEXION COMBINES

2010 JD 9770 combine, Bullet Rotor, corn/bean/grain, contour master, rock trap, Y/M monitor, Auto Trac ready, Hi Torq reversible variable spd feeder, bin ext, AHHC, hyd F/A, chaff spreader, auto reel spd, grain loss monitor, touchset roundbar concaves, 21’ unloading auger, 20.8-38 duals, 18.4-26 rears, only 645 sep hrs, 890 eng hrs, SN#736728; 2011 JD 9670 combine, Bullet Rotor, corn/bean/grain, contour master, rock trap, Y/M monitor, Auto Trac ready, Hi Torq reversible variable spd feeder, bin ext, AHHC, hyd F/A, chaff spreader, auto reel spd, grain loss monitor, touchset roundbar concaves, 22’ unloading auger, Xenon lighting, 20.8-42 duals, 18.4-26 rears, only 439 sep hrs, 586 eng hrs, SN#740852; 2009 JD 9770, Bullet Rotor, corn/bean/grain, contour master, rock trap, Y/M monitor, Auto Trac ready, bin ext, hopper topper, fine cut chopper, chaff spreader, 24’ unloading auger, ext wear pkg, HID lights, 800/65R32 drive tires, 480/85R26 rears, only 600 sep hrs, 906 eng hrs, SN#H09770S730932; 2008 JD 9870, Bullet Rotor, RWD, corn/bean/grain, Y/M monitor, Auto Trac ready, bin ext, hopper topper, fine cut chopper, 5 spd feeder, grain loss monitor, auto reel spd, AHHC, HID lights, power tailboard, 520/42 duals, 28L26 rears, 1024 sep hrs, 1607 eng hrs, SN#S726016; 2008 JD 9860, Bullet Rotor, corn, grain, bean, Y/M monitor, Auto Trac ready, chopper, var spd feeder, grain loss monitor, auto reel spd, HHC, 520/42 duals, 600/26 rears, 1282 sep hrs, 1824 eng hrs, SN#715909; 2008 Lexion 585R, track machine, RWD, corn/bean/grain, 3D sieves, dual cyl spd, contour feeder, straw chopper, variable spd feeder, AHHC, F/A, auto pilot, grain loss monitor, yield mapping, Y/M monitor, on board computer, 208” unloading auger, auto reel spd, 1199 sep hrs, 1697 eng hrs, clean, SN#57800733; 2004 JD 9660 Walker, RWD, bin ext, AHHC, auto reel spd, grain loss monitor, 800-32 drive tires, 28L-26 rears, 60% rubber, 1791 sep hrs, 2656 eng hrs, used in wheat only, SN#W705345; 2000 JD 9550 Walker, AHHC, DAS, DAM, bin ext, chopper, chaff spreader, 2420 sep hrs, 3550 eng hrs, SN#685937; 1996 JD 9600 RWD combine, DAM, DAS, HHC, chopper, chaff spreader, bin ext, 2622 sep hrs, 3710 eng hrs, 18.4-38 duals, SN#665735; 1994 JD 9500, DAM, DAS, HHC, F/A, duals, chopper, bin ext, 3633 eng hrs, SN#X655262; 1990 JD 9600, DAM, DAS, HHC, F/A, duals, chopper, bin ext, 4623 eng hrs, SN#X637700

CORN HEADS

2012 Case IH 3412 12R30 corn head w/ knife rolls, hyd deck plates, AHHC & field tracker, only used 1 season, SN#YBS023118; 2012 Capello 1222 12R22 chopping corn head w/ AHHC, knife rolls & hyd deck plates, single owner, CIH AFX adap, SN#8221; 2012 Capello 1222 12R22 chopping corn head w/ knife rolls & hyd deck plates, single owner, CIH AFX adap, SN#8228; 2011 Geringhoff NS1222 12R22 corn head w/ knife rolls & hyd deck plates, 1800 acres, single owner, SN#7067111222/B; 2010 Geringhoff NS1622 16R22 corn head, SN#7182101622; 2008 Geringhoff RD630 corn head, 2 sensor head sight hdr height, red poly, 88 series CIH mounts, reconditioned, 3500 total acres, SN#92927630; 2007 Geringhoff RD1222 12R22 corn head w/ AHHC & rotodisc chopping head, SN#915871222; 2005 Harvestec 8R30 chopping corn head, CIH adapter, SN#5095; JD 8R22 corn head, 5 yrs on new recondition & GVL II poly- clean

FLEX HEADS & DRAPERS

2011 Case IH 2162 40’ flex draper head w/ finger reel, knife reverser, F/A, skid plates & slow spd transport, SN#YBZN14524; 2011 Case IH 2162 40’ flex draper head w/ finger reel, F/A & slow spd transport, SN#YBZN15381; 2011 Case IH 3020 35’ flex head w/ Crary air reel, 3” cut, F/A, in cab control, good poly & new sickle, SN#YBZL57374; 2009 Case IH 2162 40’ flex draper, 3” cut, F/A, finger reel, SN#Y9ZN11297; 2008 Case IH 2162 40’ flex draper, 3” cut, F/A, finger reel, SN#Y8ZN10714; 2008 Case IH 2162 40’ flex draper, 3” cut, F/A, finger reel, SN#Y8ZN10678; 2008 Case IH 2020 35’ flex head, 3” cut, F/A, finger reel, SN#CBJ041578; 2009 JD 635F 35’ flex head w/ Crary wind system, 3” cut, F/A, full finger auger, pickup reel & good poly, SN#730800; 2009 Case IH 2020 30’ flex head w/ bat reel, Crary wind bar, 3” cut, AHHC, F/A & field tracker, SN#Y9ZL52029; 2008 Case IH 2020 flex head, SN#CBJ041334; 2008 Case IH 2162 40’ draper head w/ pickup reel & skid plates, SN#Y8ZN10964; 2008 Cat F540 40’ flex head w/ auto reel spd, AHHC, F/A & field tracker, SN#44100519; 2006 Case IH 2052 40’ draper head, 3” cut, finger reel, F/A, slow spd transport, SN#CCC0014771; 2005 Case IH 2042 30’ draper head w/ built in transport, SN#CCC0013199; 2004 JD 630F 30’ flex head w/ full finger auger, AHHC, F/A, auto reel spd & contour master, SN#707216; 2004 Gleaner 8000 25’ flex head, Crary air reel, SN#AN84307; 2001 Case IH 1020 25’ flex head w/ finger reel, AHHC & F/A, SN#JJC0325638; Case IH 1020 30’ flex head w/ Crary air reel, 3” cut, F/A, good shape, SN#JJC0218782; 2001 Macdon 972 25’ draper head w/ 871 Macdon adapter, fits Case IH combines, SN#142185- adapter SN#122372; 2002 JD 925F 25’ flex head, SN#F69673; 2002 JD 925F 25’ flex head, SN#F69627; 1998 Case IH 1020 25’ flex head, SN#JJC0316529; 1996 Macdon 962 30’ rigid draper head, SN#108160; 1992 JD 925F 25’ flex head w/ F/A, AHHC, poly, plastic reel wraps & poly reel wraps, hookups for 8820/9600, SN#646164; JD 930F 30’ flex head w/ Crary air reel, full finger auger, 3” cut & F/A, SN#687152

OTHER HEADS

2008 Case IH 2016 pickup platform w/ Swathmaster pkp & AFX/CR adapter, used very little, like new SN#22481; 1995 Case IH 1010 25’ rigid head; Case IH 1010 18’ rigid head w/ sunflower pans; Case IH 1010 rigid head, SN#JJC0124113; 1991 JD 930 30’ rigid head w/ Sund pkp, converted to edible bean head, SN#P641207; JD 912 pickup platform w/ 6 belt pkp; JD 912 pkp platform for parts; Case IH 1015 pickup head; Case IH 1015 pickup head w/ 397 Westward pkp; 1981 JD 222 22’ flex head w/ pkp reel, SN#489948; 1978 JD 212 pickup head w/ 5 belt pkp, SN#323310; Sund 11’ pickup; 2000 Macdon 871 adapter, fits JD combines, SN#134617

HEADER TRAILERS

3) Unused America 435 35’ 6-wheel header trailer; 3) Unused America 430 30’ 4-wheel header trailers; 2) Unused America 425 25’ 4-wheel header trailers; Hart 30’ single header transport; 2) 2-wheel header transport; 4-wheel header transport for storage

FARM TRUCKS

2005 IH 9200i tandem, Cummins ISX 430hp, Eaton Fuller 10 spd, 3:90 ratio, good 11R24.5 rubber on steel disk wheels, new 20’ Load Line box, hoist, roll tarp, comb 3pc end gate & rear controls; 2005 IH 9200i tandem, Cummins ISX 430hp, Eaton Fuller 10 spd, 3:90 ratio, good 11R24.5 rubber on steel disk wheels, new 20’ Load Line box, hoist, roll tarp, comb 3pc end gate & rear controls; 2001 Freightliner Columbia tri-axle, Detroit 60 series 470hp, Eaton Fuller 10 spd, full third lift tag, 11R24.5 tires, alum wheels, new 21’ Load Line box, hoist, roll tarp, comb 3pc end gate, rear controls & beet equipment; 1999 Kenworth T-800 quad axle, Cat C-10 350hp, Eaton 8LL trans, 4:88 ratio, 11R22.5 tires, alum wheels, full 3rd lift tag, pusher 4th, full locking rears, new HMI 24’ box & hoist w/ comb end gate, roll tarp, rear controls & beet equipment, heavy spec truck, only 237440 actual miles, sharp; 1997 Kenworth T-600 tri axle, Cat 3406E 475hp, Eaton 8LL trans, 3:70 ratio, 11R22.5 tires, alum wheels, full 3rd lift tag, full locking rears, new HMI 22’ box & hoist w/ comb end gate, roll tarp, rear controls & beet equipment, 605274 actual miles, sharp; 1995 IH 8200 triaxle, Cummins M11, 9 spd, full 3rd lift tag, 23’ Loadline box, hoist, combo end gate, roll tarp & rear controls, approved equipment for heavy haul, 1 season on brakes, 450000 miles showing; 1975 IH Loadstar tag tandem, 404 V8 engine, 5/2 spd, 20’ B&H box, 10.00-20 tires- 50%; 1985 Ford 9000 twin screw water truck, Detroit 6V92 engine, 9 spd, 2) 1500 gal tanks, new Honda pump, 11R22.5 tires, new steer tires, 50% tires & brakes, full service records, DOT inspected

SEMI TRACTORS

2007 Peterbilt 379 day cab, Cat C15 475hp, 10 spd, engine brake, tilt & telescope wheel, low air susp, 4:11 ratio, alum deck plate, , 200 WB, 11R22.5 low pro, alum wheels, 623000 miles showing; 2007 Peterbilt 385 day cab, Cat C13 430hp, 10 spd, engine brake, tilt & telescope wheel, low air susp, 3:90 ratio, alum deck plate, air slide 5th, 192 WB, 11R22.5 low pro, alum wheels, 327000 miles showing; 2007 Peterbilt 385 day cab, Cat C13 425hp, 10 spd, custom interior, air ride cab, engine brake, tilt & telescope wheel, air ride susp, 3:70 ratio, alum deck plate, air slide 5th, dual tanks, dual chrome stacks, 188 WB, 11R22.5 low pro, alum wheels, 877000 miles showing; 2006 Peterbilt 385 day cab, Cat C15 435hp, 10 spd, engine brake, tilt & telescope wheel, low air susp, 3:70 ratio, air slide 5th, dual alum tanks, dual stacks, 226 WB, 11R22.5 low pro, alum wheels, 564283 miles showing; 2006 Peterbilt 385 day cab, Cat C13 425hp, 10 spd, custom interior, engine brake, tilt & telescope wheel, air ride susp, 3:70 ratio, alum deck plate, air slide 5th, dual tanks, dual chrome stacks, 178 WB, 11R22.5 low pro tires, alum wheels, 959000 miles showing; 2007 IH 8600 day cab, Cummins ISM 385hp, 10 spd, engine brake, tilt & telescope wheel, air ride susp, air slide 5th , 168 WB,11-22.5 tires, alum/steel wheels, 570252 miles showing; 2006 Freightliner CST12064ST Century 120 day cab, Detroit 60 Series 14L 515hp, 10 spd, tilt & telescope wheel, air ride susp, 3:42 ratio, air slide 5th,, 230 WB, 11R22.5 low pro, alum wheels, 755000 miles showing; 2004 IH 9200i day cab, Cummins ISX 435hp, 10 spd, deluxe interior, engine brake, tilt & telescope wheel, air ride susp, alum deck plate, air slide 5th , dual alum tanks, single stack, 161 WB, 11R22.5 low pro, alum wheels, 287000 miles showing; 2004 Kenworth W900 Aero cab sleeper, Cummins ISX 475hp, 10 spd, engine brake, tilt & telescope wheel, smart wheel, air ride susp, 3:55 ratio, air slide 5th wheel, 255 WB, 11R22.5 low pro tires, alum wheels, 903372 miles showing; 2002 Freightliner FL112, 24” single bunk flattop sleeper, Cat C12, 13 spd, air ride, 220 WB, dual alum tanks, wet kit, 11R24.5 tires, 1043612 miles showing; 2002 Mack CH613 day cab, Mack engine 427hp, 10 spd, wet kit, dump valve, 743000 miles showing; 1999 Mack CH513, E7 355/350, 10 spd auto shift, hot shift PTO, 4:11 ratio, 40000 lb rears, mud scrapers, 340000 miles showing; 1998 Peterbilt day cab, Cummins M11, 10 spd, 11-22.5 tires; 1997 Freightliner FLD112 day cab, Cummins M11 350hp, 18 spd, hot shift PTO, 25 gal reservoir, 4:11 ratio, 40000 lb rears, set back front, grip tires, mud scrapers, 431000 miles showing; 1996 Volvo, Cummins M11 400hp, 10 spd, virgin rubber all around, new windshields, 3 yr old batteries, 601800 miles showing; 1994 Mack CH613 semi tractor, 48” midrise sleeper, Mack engine, Eaton Fuller 13 spd, 285/75R24.5 tires, alum wheels, 1100748 miles showing; 1989 IH 8300, Detroit 11.1 engine, like new tires, need trans work; 1986 Volvo integral sleeper, Big Cam III Cummins engine 350hp, 13 spd, 4:44 ratio, new air compressor & dryer; 1985 Ford 9000 twin screw, Cat engine, Road Ranger trans, wet kit, 5th wheel, good matching rubber, DOT’d; 1984 IH 9670 COE, Big Cam III Cummins engine 400hp, 13 spd, 4:10 ratio

HOPPER BOTTOMS, LOW BOY & OTHER SEMI TRAILERS

2012 Timpte 42’x72”x 96” alum hopper bottom trailer, ag hoppers, 11R24.5 tires, alum wheels, air ride w/ scale & roll tarp; 2010 Timpte 42’x72”x 96” alum hopper bottom trailer, ag hoppers, 11R24.5 tires, alum wheels, air ride w/ scale, roll tarp, very low miles, single owner; 2011 Timpte 42’x66”x 96” alum hopper bottom trailer, ag hoppers, 11R24.5 tires, alum wheels, air ride w/ scale & roll tarp; 2007 Neville 40’ steel hopper bottom trailer, ag hoppers, 102” wide, 26” hopper clearance, 60” sides, roll tarp, 24.5 tires, steel disk wheels; 1997 Timpte 42’ x 66” x 96” alum hopper bottom trailer, 11R24.5 tires, alum wheels, spring susp, roll tarp; 1999 Eager Beaver 52’ x 102” 50T NGB detachable low boy trailer, tri-axle, fixed axle, steel composite, wood deck, 24’ well, outriggers, 255/70R22.5 tires, alum wheels; 1994 Timpte 42’ x 96” x 72” hopper bottom trailer w/ air ride, new tarp, 11-24.5 tires on all alum rims, good tires & brakes; 1992 Wilson 41’x84”x96” alum hopper bottom trailer, 11R24.5 tires, alum wheels, roll tarp; 1979 Timpte 40’ hopper bottom trailer w/ roll tarp & good brakes

SPRAYERS, FLOATERS & CHEMICAL EQUIPMENT

2012 TopAir 2400 pull type sprayer on tracks w/ 132’ suspended boom, hyd boom leveling, 2400 gal poly tank w/ hyd pump drive, 4-way nozzle bodies, fence row nozzles, in cab tip pressure transducer, 5 sensor sonar & touchdown wheel autoboom, JD ISO rate controller, JD ISO steerable hitch, 16” belts, boom lights, SN#B30440114; 2012 TopAir 2400 pull type sprayer on tracks w/ 132’ suspended boom, hyd boom leveling, 2400 gal poly tank w/ hyd pump drive, 4-way nozzle bodies, fence row nozzles, in cab tip pressure transducer, 5 sensor sonar & touchdown wheel autoboom, JD ISO rate controller, JD ISO steerable hitch, 16” belts, boom lights, SN#B30440115; 2008 Case IH SRX160 pull type sprayer w/ 120’ suspended booms, front fold, 1600 gal poly tank, monitor, hyd pump drive, agitator & 14.9-46 tires, single owner, SN#Y8S005067; 2003 Apache 890 self propelled sprayer w/ 90’ booms, 800 gal tank, 450 Raven, Trident air bar & rear duals, SN#906-2398; 2000 Ag Chem Rogator 1254 self propelled sprayer, stainless tank, 100’ boom, 3 way nozzle bodies, Raven controller, 275/90R54 duals, 4201 hrs, well equipped; 2002 Spray Aire 3400 pull type sprayer w/ 90’ Trident suspended booms, front fold, hyd boom leveling, 1000 gal poly tank, monitor, hyd pump drive &13.6-38 tires, SN#34192; 1998 Ag Chem Terragator 1903 dry fert floater, Cummins L10 engine 350hp, 18 spd Eaton Torque Boost trans, Soilection 6 bin box, 70’ air booms, Falcon 2 controller & elec roll tarp, 5257 hrs, SN#1906935; Ag Chem Terragator 1603 dry fert floater, Cat 3208 engine, 10 spd trans, single box, 60’ air booms, flip tarp, 4250 eng hrs, SN#1602350; Brandt 4000 90’ suspended boom sprayer w/ 5 section boom control, 1600 gal tank, clean water tank, mix tank, single nozzle bodies, touchdown wheels, adj axles & windshields, 380/85R46 tires

TILLAGE EQUIPMENT & DRILLS

Case IH Tigermate II 50 ½’ field cultivator w/ five section fold, walking tandems around, wing gauge wheels, depth control, new 3 bar harrow & new sweeps, SN#JFH0003834; Ezee On 3800 36’ cushion gang disk w/ 11” spacing, 25 ½” front blades, 24 ½” rear blades & scrapers, SN#40992; Ezee On 4600 32 ½’ cushion gang disk w/ 12” spacing, 26” front blades, 27” rear blades & rigid scrapers,SN#45368; Wishek 842T 24’ heavy duty spring cushion disk w/ 11” spacing, front blades measure 27”, SN#249426; JD 2200 45’ 5 fold field cultivator w/ walking tandems around, depth control, 3 bar harrow, wing gauge wheels & casters; Wilrich 4400 35’ spring std chisel plow, walking tandems around, new sweeps, 3 bar harrow; Late model Flexicoil S82 70’ 5 bar adj harrow w/ down pressure springs & auto fold, good unit; Case IH 9300 9 shank ripper w/ all new points, SN#824352; JD 2700 18’ disk ripper w/ front disks & rear disk levelers, SN#X00730; Case IH 730B 18’ 7 shank disk ripper w/ front disks, rear disk leveler & lead shanks, SN#JFH0020379; Case IH #14 V-ripper, 3pt or pull type, cover boards, cast iron points, low acres; JD 980 44 ½’ field cultivator w/ walking tandems around, 3 bar harrow & wing gauge wheels, SN#X001762; Flexicoil System 92 60’ auto fold harrow packer w/ 5 bar sections; JD 1650 16’ heavy tandem disk w/ twin cyl lift, notched blades & dual wheels; JD 1060 62’ 5 fold field cultivator w/ walking tandems around, 3 bar harrow, single point depth control & wing gauge wheels; Alloway RTS 43’ field cultivator/ conditioner; Degelman 43’ 3 bar harrow for cultivator; Case IH 8600 30’ air disk drill, 6 ½” spacing, hyd markers, dry fert, track eliminators front & back, small & large 1000 PTO shafts, PTO fan; JD 9350 30’ press drill w/ 6” spacing & factory transport, kept indoors; IH 620 28’ press drill w/ liquid attachment on transport; Great Plains folding drill w/ grass attachment & solid stand

PLANTERS & PICKETT ONE STEP

JD 1790 16R30/31R15 interplant Maximerge Plus vaccum planter w/ CCS central fill, pneumatic down pressure, Seed Star w/ display, new variable seed openers, Keeton firmers, new depth arm bushings, Precision corn & soybean plates, very nice condition, SN#705399; 2012 Pickett One Step 12R22 bean cutter/windrower, cushion shank, movable draper, center & end delivery, approx 900 acres, excellent condition; JD 7200 24R22 Maximerge II vacuum planter on Friesen front fold bar, nearly new 1.6bu poly boxes, herb/insecticide, markers, monitor & accessories, clean unit; Late model JD 7300 12R30 Maximerge II vacuum planter w/ vertical fold, lift assist, 1.6bu poly boxes & corn/bean/beet plates; Late model JD 7300 12R30 Maximerge II vacuum planter w/ lift assist, 1.6bu poly boxes & corn/bean/beet plates

SWATHER, GRAIN CART & AUGERS

2006 MacDon Premier 2952i turbo/diesel self propelled windrower, 972 25’ draper platform w/ 6 bat finger reel, F/A, 3-way table & self leveling cutter bar, spindle type rear wheels, 16.5-16.1 rears, 540/65R24 fronts, 772 engine hrs, 597 header hrs, very clean, SN#168580; 2001 American 2420 380BU auto batch grain dryer, rated at 11400Bu/ day- dry & cool, twin fan, single phase, pre-burner vapor conversion, Kittleson controls, nice unit, single owner, low hrs, SN#0292RB2001; 2012 Rem 2700 grain vac w/ complete hose pkg, only 259 hrs, like new, SN#0967; 2011 Rem 2700 grain vac w/ complete hose pkg, nice unit; 2011 Brandt 1545 grain belt conveyor w/ hyd mover & 30hp Kohler engine; Brandt 10x60 auger w/ swing away hopper; Orthman 700bu grain cart; Westfield J208-51 8x51 grain auger w/ 10hp Baldor elec motor; Westfield J207-41 7x41 grain auger w/ 7 ½hp Baldor elec motor, very good condition; Westfield J207-31 7x31 grain auger w/ 5hp Baldor motor; Brandt 1585 conveyor, PTO or electric; KBH self contained stainless steel field conveyor w/ 20hp Kohler engine, used for fertilizer, like new; Farm King steel drum canola roller

HAY & LIVESTOCK EQUIPMENT

2009 Macdon A30-S 18’ mower/conditioner, swing hitch, new twin sickles, new guards, steel conditioner rollers, new set of extra sickle guards, single owner, used for 3 seasons on alfalfa, excellent reel, stored inside; 2003 New Holland 1475 hay conditioner w/ 2300 Series 18’ head, new tires, new cyl for lift system, 2 yr old hydro pump, 1 yr on sickle & guards, oil changed this year; Buffalo model 7200-1254 high capacity corn & feed roller mill, PTO, 5000 bu/hr, SN#20077200688; Haybuster 2650 1000 RPM round bale processor, SN#26FJ237250; Unused America bale wagon; Unused America hay feeder; Unused America silage feeder; SturD self contained portable crowding tub w/ alleyway, transport & Reel Industries head gate; Vern’s portable steel loading chute; Wilson wheel corral, SN#13152; Vern’s self feeder w/ creep racks & transport; Large cattle squeeze chute; Powder River calf table; 16’ & 24’ livestock panels

OTHER TRUCKS, PICKUPS, TRAILERS & TRUCK ACCESSORIES

2012 Wells Cargo 7x14 tandem axle enclosed cargo trailer w/ ramp gate & side door, used very little; 2000 Ford F450XL SD service truck, Power Stroke V8 diesel, auto trans, spring susp, Stahl 3200LRX crane, 11000 lb rears, 165 WB, 255/70R19.5 tires, all steel wheels, 206126 miles showing; 2004 Chev 2500HD Silverado 4x4 crew cab, Duramax 6.6L diesel, Allison auto, power seats, locks, windows & mirrors, cold air intake, chip along w/ programmer, 8” lift kit, 35” all terrain tires, 20” Rockstar rims, less than 500 miles on new tires & batteries, 90000 actual miles; 2002 GMC C6500 service truck, 8.1L gas, Allison auto, a/c, power steering, 10’ service body w/ low sides, low profile 255/19.5 tires, set up to pull gooseneck trailer, 130000 miles showing; 1998 Peterbilt tri axle dump truck, Cummins M11, 10 spd, 16’ gravel dump box, 11R22.5 tires; 1983 Ford LN7000 tandem axle fuel & lube truck w/ 8.2L diesel fuel pincher engine, 7 product tanks, elec start air compressor, generator, hose reels & front tool room; 1979 IHC S-1954 tandem twin screw, Detroit diesel, 13 spd, 19’ gravel dump body, 10.00-20 rears; 2001 Dodge 1500 1/2T 4x4 quad cab pickup, V8 5.9L, 188000 miles showing, runs great; 1998 Chev 2WD pickup, good tires, 150000 miles showing; Shop built triaxle bumper hitch trailer; JD 28’ tandem axle donahue trailer; Bert’s pickup service body w/ fuel tank, 12Vpump, tool box, generator & crane; 3) 7000lb trailer axles w/ new spring & mounting hardware, new rims & tires; 2) Shurlock truck endcaps, 5) tarp bows & assorted Shurlock parts; 19’ x 8’ sheet of plastic bedliner; 2001 Pontiac Bonneville 4 door, 188000 miles

SCRAPERS, DRAINAGE TOOLS & GPS GEAR

Ashland I-110 11yd hyd push off scraper, SN#16255; Cat 70 12-15 yd hyd conversion push off scraper; Cat 60 11 yd hyd conversion push off scraper, SN#4F4529; HyGrade model 1400 14’ multiangle blade w/ 2 endcaps, steerable rear axle & weight box, SN#JM1002-114; 3) JD Greenstar GPS kits w/ original brown box display units & Starfire ITC receivers w/ SF-1 Activation; 1) JD Greenstar GPS kit w/ 2600 color touch screen, Spray star & Starfire ITC receiver w/ SF-1 activation & RTK; AGPS GPS screen w/ Tile Pro, receiver & base station; Eagle ditching & leveling laser w/ 3 receivers & all accessories; Tripod for RTK set up; Stabilaser portable telescoping laser stand; 2) Outback S3 GPS guidance systems; Outback S3 & eDriveTC; SSR 12” rotary water pump w/ discharge hose

CONSTRUCTION EQUIPMENT & SKID STEER ATTACHMENTS

2011 JD 310SJ 4x4 loader backhoe, ext hoe, EROPS w/ A/C & heat, pilot controls, QC GP bkts, 18” backhoe bkt, breaker line, only 799 hrs, single owner, local unit, SN#1T0310SJVB0201760; Liftall MT80 rough terrain forklift, gas engine, 3 stage mast, sideshift, ROPS, SN#76282; Whiteman B-16 walk behind concrete dumper w/ 13hp Honda engine, SN#220718; Wacker WB16AF concrete dumper w/ 13hp Honda engine, SN#5007684; Used thumb for mini excavator; Supra walk behind plate compactor; 3) Unused Lowe 750ch hyd augers w/ various 9”, 12” & 15” bits & skid steer quick attach; Unused Stout 66” brush/grapple bucket w/ skid steer quick attach; Unused Stout XHD84 brush/grapple bucket w/ skid steer quick attach; Unused Stout HD72 rock/grapple bucket w/ skid steer quick attach; Unused Stout HDU72 brush/grapple bucket w/ skid steer quick attach; Unused Stout 72” grapple bucket w/ skid steer quick attach; Unused Stout SG13R stump grinder w/ skid steer quick attach; Unused Stout 84” material bucket w/ double cut edge & skid steer quick attach; Unused Stout 96” snow bucket w/ double cut edge & skid steer quick attach; Unused Stout receiver plates; Unused Stout regular skid steer plate; Unused Stout solid skid steer plate; Unused Stout grapple add-on ; 2) Unused Stout walk through 48” pallet forks w/ skid steer quick attach; Unused Stout full back 48” pallet forks w/ skid steer quick attach; Unused 48” pallet forks w/ skid steer quick attach; 2) Unused heavy duty walk through pallet forks w/ skid steer quick attach; Unused receiver plate; 2) Unused quick attach plates; Unused 102” snow bucket w/ skid steer quick attach; Unused 96” snow bucket w/ skid steer quick attach; 72” x 28” angle blade skid steer attachment

OTHER EQUIPMENT, TOOLS & MISC

Woods 9204 17’ finishing mower w/ new blades, SN#1331; Bushhog 2615 Legend 16’ double batwing rotary mower w/ chain kit & pneumatic tires, 1000 PTO; MM Z antique tractor, repainted, has not been started for 8 yrs; 5) Unused 12’ pull type box blade/killifer; Unused heavy duty 12’ pull type box blade/killifer; 5) Unused 10’ pull type box blade/killifer; 2) Unused 10’ 3pt pull type box blade/killifer; 2) Unused 9’ 3pt pull type box blade/killifer; 12) New JD red sunflower plates w/ fillers; 3) UFT bean cutter dividers; LH UFT standard bean cutter, complete; RH UFT standard bean cutter, complete; Nissan 1222 rod weeder; 2) 2010 EZ GO 48V elec golf cart w/ club canopy & charger; Kohler 80KW 120 amp generator w/ Power 549 International propane engine; Coleman Powermate 5000 10hp generator; Erskine 8’ 2 stage snowblower w/ 540 PTO; Erskine 4020 84” rear mount snowblower w/ hyd spout; Miller welder; 1000 gal fuel tank w/ hand pump on skids; 560 gal fuel tank on skids, no pump; Tuthill fuel pump w/ big hose, filter & nozzle; Endura fuel 25 gal tank w/ pump; 2) 250 gal bulk oil tanks; 1760 gal poly water tank; 2) Baldor 5hp motors; Dayton 7.5hp motor; GE 3hp 220v motor; JD Cat 3N quick hitch; Fargo Products markers for JD 30’ no-till drill, fits 50, 60 & 90 series; Corn filler for JD 9600 combine; Side panel for JD 9600 combine; Direct drive pulley set for JD 9600 combine; 4) JD 50lb T-weights; 3) Rear combine wheel weights for older JD combine; Set of edible bean grates; Pair of JD mechanical front fenders; Caldwell 12” 3/4hp fan; Overhead door raised panel 8’ x 7’ roll up door; 1974 Enduro F7 KAW175 motorcycle, runs well; 1975 Street G3 KAW100 motorcycle, runs well; 7’ x 7’ dock leveler w/ 1’ beaver tail; Duracraft ¾ HP bench grinder; Craftsman radial arm saw; 3) 1000 gal fuel tanks w/ fresh paint- no pumps or leaks; JD 380 9’ 3pt sickle mower; JD 72” belly mower for compact utility tractor; Bagger & chute for GT2550 cub cadet; 90 gal fertilizer tank w/ saddle; Unused Enduraplas 60 gal UTV sprayer tank

TIRES

PR 320/80R54 rear tires on JD inside rims- 50%; PR 320/80R54 rear tires on JD dual rims- 50%; PR 320/85R34 front tires on JD rims- 50%; Firestone 420/80R46 tire; 6) Cast center wheels for JD tractors; Goodyear 30.5L-32 combine tire; Firestone 35.5-32 cane & rice tires on JD 10 bolt rims, off of JD 9760; 8) 21-32 rims to fit JD 8760; 2) 30.5-32 combine rice tires; Set of 21.5-16.1 swather tires; Assorted tractor & implement tires; 2) Pair of floatation duals for Macdon SP swathers; 4) Goodyear 18.4R42 tires- 25%; 4) Firestone 18.4R38 tires & rims for duals & mains- 25%; 2) 11L15 airplane tires on rims; 6) 255/70R22.5 tires; 2) New Titan 16.9-26 tires; Set of Coop 16.9-34 tires

GRAND FORKS AREA EQUIPMENT & TRUCK AUCTION

For more information call 701-757-4015 office, 701-215-2058 Dennis

TERMS: Cash, cashier’s check, wire transfer, approved check in US funds. All sales final. Statements made auction day take precedence over all advertising. ND Sales tax laws may apply on some construction & consumer units. Document fee on vehicle titles will apply & vehicle titles will be mailed to buyers.

Canadian buyers are always welcome, please furnish a letter of credit for registration. Some purchases require payment by wire. Most units move easily across the border, feel free to ask in advance for document assistance if necessary.

AUCTIONEERS & CLERK: Main Resource Equipment Auctions, Dennis Biliske- Auctioneer, 2702 17th Ave S, Grand Forks, ND 58201, ph 701-757-4015, fax 701-757-4016, Dennis Biliske ND Lic 237, ND Clerk Lic 624, email- info@resourceauction.com, website- www.resourceauction.com

Reload Map